Display Settings
Use the
Display Settings
to adjust image.
Aspect Ratio
Adjust the image ratio to Wide 16:10, 16:9, Auto Resize, 4:3 or 1:1.
NOTE:
Wide 16:10 is not available in U2713H.
Sharpness
This feature can make the image look sharper or softer. Use
or
to adjust the sharpness from '0' to '100'.
Noise Reduction
Improve the motion picture quality by reducing noise on image edge.
Dynamic Contrast Dynamic Contrast
adjusts the contrast ratio to 2M to 1.
Press the
key to select the Dynamic Contrast "On" or "Off" .
NOTE:
Dynamic Contrast
provides higher contrast if you select Game or Movie preset mode.
Uniformity Compe
nsation
Select screen brightness and color uniformity compensation settings.
Calibrated
is factory calibrated setting by default.
User
is reserved for Dell approved
user calibration software settings.
Uniformity Compensation
adjusts different areas of the screen with respect to the center to achieve uniform brightness
and color over the entire screen. For optimal screen performance, Brightness and Contrast for some preset modes (Standard, Color Temp.) will be disabled
when
Uniformity Compensation
is turned On. When
Uniformity Compensation
is turned On, Energy Smart cannot be activated.
NOTE
: Screen Uniformity performance is optimized at default out of factory luminance setting.
Smart Video Enha
nce
Press the
key to select the
Smart Video Enhance
"Movie" or "Advance" or "Off" .
Smart Video Enhance
automatically detects video (motion) in any window on the screen, and applies enhancements to the video. Only the video window is
enhanced. Two different enhancement settings are available:
Movie
- suitable for movie or multimedia video clips.
Advanc
e - User adjustable setting.
NOTE:
Smart Video Enhance (SVE) enhances one of the video windows (typically the largest), if multiple video windows are active on the screen.
DisplayPort 1.2
