Dell UltraSharp 2009W, User Manual

Page: 22 / 26

After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your monitor
setup:
l
Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
l
Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See rear or bottom view for details.)
l
Plug the power cables for your computer and monitor into a nearby outlet.
l
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Solving Problems .
l
Use the cable holder on the monitor stand to organize the cables.
Organizing the Cables
After attaching all the necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot
to organize all cables as shown above.
Attaching the Soundbar
NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.
Downloaded from ManualMonitor.com Manuals