5. Disassembly and Assembly Procedures
3
2
1
S12
S11
S10
(No.1~4 screw size=M3x4, Torque=3.5
±
0.5kgfxcm)
Use a Philips-head screwdriver to remove 4pcs
screw for unlocking the USB unit with the middle
frame, and then release the USB unit from the hooks
of middle frame.
3
2
1
4
Use a Philips-head screwdriver to remove 2pcs
screws for unlocking the USB cover, remove the USB
cover, then use a Philips-head screwdriver to remove
1pcs screw for locking the USB board with the USB
bracket. Disconnect the USB connective cable.
No.2~3 screw size=M3x4, Torque=1
±
0.2kgfxcm)
(No.1 screw size=M3x3, Torque=3.5
±
0.5
kgfxcm;
3
2
1
Release the speakers’ cable to from the hooks of the
middle frame, then remove the speakers.
1
2
7
8
9
13
14
15
3
4
5
6
10
11
12
21
20
19
18
17
16
22
23
24
25
26
28
27
Tear off 1pcs aluminum foil to release the bracket
chassis. Use a Philips-head screwdriver to remove
28pcs screws for unlocking the middle frame with the
panel module.
(No.1~28 Screw size= M3x0.5x4, Torque=5
±0.5
kgfxcm)
S7
S8
S9
Tear off 3pcs aluminum foil, then
use a Philips-head
screwdriver to remove 4pcs screws for locking the
bracket chassis module with the panel
.
(No.1~4 Screw size= M6x12, Torque=9
±
0.5
kgfxcm)
Lift up the bracket chassis, and disconnect the LVDS
cable from the connector of the T-CON board of
panel module, then put the bracket chassis on a
protective cushion for later disassembling.
2
3
4
1
