InfiniBand Blade Switch I/O Module for PowerEdge M-Series
Rev 1.2
Mellanox Technologies
15
(non blinking indicating that no data is being transferred yet). When a logical connection is made
the yellow LED will blink signifying data is being transferred.
Figure 6: Belly to Belly Cable Insertion
To remove, disengage the locks and slowly pull the connector away from the port receptacle. Both
LED indicators will turn off when the cable is unseated.
Care should be taken not to impede the air exhaust flow through the chassis.
2.4.1 Supported Approved Cables
For a list of all approved cables see:
www.mellanox.com/related-docs/user_manuals/Mellanox_approved_cables.pdf
Cables in theBelly to Belly right side should be inserted up side down in relation to the
how the cables are inserted in the left side.
Cable lengths should be used which allow for routing horizontally around to the side of
the chassis before bending upward or downward in the rack.
