Replacing the speakers
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Topics:
•
•
Procedure
1
Using the alignment posts on the palm-rest assembly, place the speakers on the palm-rest assembly.
2
Replace the four screws (M2x2) that secure the speakers to the palm-rest assembly.
3
Route the speaker cable on the system board and adhere the tape to the system board.
4
Connect the speaker cable to the system board.
5
Adhere the tape securing the speaker cable to the system board.
Post-requisites
1
Replace the
.
2
Replace the
.
12
22
Replacing the speakers
Summary of Contents for Studio XPS 13 - Laptop - Obsidian
Page 10: ...10 Removing the base cover ...
Page 13: ...Removing the battery 13 ...
Page 18: ...18 Disconnecting the wireless antenna cables ...
