|
31
Mounting using anchor
screws
To mount the SonicPoint using included anchor screws:
1 On the mounting surface, mark the location to make
two screw holes. The marks should be horizontally
parallel to each other.
2 Drill the holes to accommodate the metal anchor
screws.
3 Screw the anchor screws into the holes to their full
depth.
4 Insert the 5/8” screws into the anchors, and screw
them in deep enough to leave minimal space between
the screw heads and the wall surface.
5 (Optional) Attach the front LED/logo cover plate to the
top of the SonicPoint and if necessary, rotate it to the
desired position.
6 Supporting the SonicPoint in your hands, securely fit
the underside slots of the SonicPoint onto the screw
heads.
Ceiling Crossbar
Mounting Brackets
SonicPoint_ACe_GSG.book Page 31 Monday, September 29, 2014 5:23 PM
Draft
Document
Summary of Contents for Sonicwall Sonicpoint Ace
Page 1: ...Dell SonicWALL SonicPoint ACe Getting Started Guide D r a f t D o c u m e n t ...
Page 28: ...26 SonicPoint_ACe_GSG book Page 26 Monday September 29 2014 5 23 PM D r a f t D o c u m e n t ...
Page 53: ...SonicPoint_ACe_GSG book Page 1 Monday September 29 2014 5 23 PM D r a f t D o c u m e n t ...
