Dell SonicWALL NSA E6500 Getting Started Manual Download Page 10

Page: 10 / 74

The Front Panel

Icon

Feature

Description

LCD Screen

Displays the front panel bezel interface which can be used to display status information, make
certain configuration changes, restart the appliance or boot the appliance in SafeMode.

Control Buttons

Used to navigate the front panel bezel interface.

Console Port

Used to access the SonicOS Command Line Interface (CLI) via the DB9 -> RJ45 cable.

USB Ports (2)

Future extension.

Reset Button

Press and hold the button for a few seconds to manually reset the appliance.

LED (from left to right)

Power LED:

Indicates the Dell SonicWALL NSA E6500 is powered on.

Test LED: Flickering

: Indicates the appliance is initializing.

Steady blinking

: Indicates the

appliance is in SafeMode.

Solid

: Indicates that the appliance is in test mode.

Alarm LED:

Indicates an alarm condition.

HD LED:

Future extension.

HA Port

High Availability port.

X0-X7 (Copper)

Gigabit Ethernet ports.

Bypass Status LED

Future extension. Please check Release Notes for future availability.

E6500

Network Security Appliance

Summary of Contents for SonicWALL NSA E6500











































































Search results

Summary of Contents for SonicWALL NSA E6500

Reviews:

Related manuals for SonicWALL NSA E6500

Brands by name

Popular brands

Dell SonicWALL NSA E6500, Getting Started Manual

Search results

Summary of Contents for SonicWALL NSA E6500

Reviews:

Related manuals for SonicWALL NSA E6500

Brands by name

Popular brands