Bezel
The front bezel is a cover for the front panel of the SC7020 storage system.
Remove the Front Bezel
Before you remove or install hard drives in the storage system, remove the front bezel.
1.
Use the system key to unlock the keylock at the left end of the bezel.
2.
Lift the release latch next to the keylock.
3.
Rotate the left end of the bezel away from the front panel.
4.
Unhook the right end of the bezel and pull the bezel away from the storage system.
Figure 6. Installing and Removing the Bezel
1.
Keylock
2. Front bezel
Install the Front Bezel
To secure the storage system, install the front bezel.
1.
Hook the right end of the replacement bezel onto the front panel of the storage system.
2.
Insert the left end of the bezel into the securing slot until the release latch locks into place.
3.
Secure the bezel with the keylock.
Hard Drives
The SC7020 storage system supports hot-swappable hard drives.
The SC7020 storage system supports a minimum of 7 internal 2.5-inch drives up to a maximum of 30
drives. The drives are installed from left to right, and then top to bottom. The first row of drives are
Replacing SC7020 Storage System Components
13
