L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default,
>- non-active route, + - summary route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
----------- ------- ----------- -----------
R 2.1.0.0/24 via 2.1.4.1, Te 1/1/1/1 120/2 3d0h
R 2.1.1.0/24 via 2.1.4.1, Te 1/1/1/1 120/2 3d1h
R 2.1.2.0/24 via 2.1.4.1, Te 1/1/1/1 120/1 3d0h
R 2.1.3.0/24 via 2.1.4.1, Te 1/1/1/1 120/1 3d1h
C 2.1.4.0/24 Direct, Te 1/1/1/1 0/0 3d1h
Related Commands
•
— enter CONFIGURATION-IP PREFIX-LIST mode and configures a prefix list.
•
— display a summary of the configured prefix lists.
show ip route summary
View a table summarizing the IP routes in the switch.
Syntax
show ip route [vrf
vrf-name
] [summary]
Parameters
vrf
vrf-name
Enter the keyword
vrf
followed by the name of the VRF to view information on the IP
routes corresponding to that VRF.
Command Modes
•
EXEC
•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100–ON.
9.8(1.0)
Introduced on the Z9100–ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.4(0.0)
Added support for VRF.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
806
IPv4 Routing
