Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.1.1.0
Introduced on the E-Series.
7.6.1.0
Introduced on the S-Series.
Usage Information
This feature groups two LAGs to work in tandem as a supergroup. For example, if one LAG goes down, the other
LAG is taken down automatically, providing an alternate path to reroute traffic, avoiding oversubscription on the
other LAG. You can use both static and dynamic (LACP) LAGs to configure failover groups. For more information,
see the “Port Channel” section in the
Dell Networking OS Configuration Guide
.
Related Command
•
— group two LAGs in a supergroup (“fate-sharing group”).
•
— display information on configured Port Channel groups.
show interfaces port-channel
Display information on configured Port Channel groups.
Syntax
show interfaces port-channel [
channel-number
] [brief] [description]
Parameters
channel-number
For a Port Channel interface, enter the keyword
port-channel
then a number. The
range is from 1 to 4096.
NOTE:
This command also enables you to view information corresponding to a
range of ports.
•
For port-channel interfaces, you can specify multiple ports as
port-range
.
For example, if you want to display information corresponding to all ports
between 1 and 4, specify the port range as
show interfaces port-
channel 1 - 4
.
brief
(OPTIONAL) Enter the keyword
brief
to display only the port channel number, the
state of the port channel, and the number of interfaces in the port channel.
description
(OPTIONAL) Displays the port-channel information with description.
Command Modes
•
EXEC
•
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
734
Interfaces
