Port 0
•
auto-negotiation enabled* speed 1000 or auto
•
auto-negotiation enabled speed 100
•
auto-negotiation disabled speed 100
•
auto-negotiation disabled speed 100
•
auto-negotiation enabled* speed 1000 or auto
Port 1
•
auto-negotiation enabled* speed 1000 or auto
•
auto-negotiation enabled speed 100
•
auto-negotiation disabled speed 100
•
auto-negotiation enabled speed 100
•
auto-negotiation disabled speed 100
Link Status Between Port 1 and Port 2
•
Up at 1000 Mb/s
•
Up at 100 Mb/s
•
Up at 100 Mb/s
•
Down
•
Down
* You cannot disable auto-negotiation when the speed is set to 1000 or auto.
portmode hybrid
To accept both tagged and untagged frames, set a physical port or port-channel. A port configured this way is identified as a hybrid port in
report displays.
Syntax
portmode hybrid
To return a port to accept either tagged or untagged frames (non-hybrid), use the
no portmode hybrid
command.
Defaults
non-hybrid
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
694
Interfaces