Dell S6100, Configuration Manual

Page: 1695 / 1743

Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage Information The retry interval value caps at the value configured on the max-backoff.
Related Commands vxlan-instance — Enable VXLAN Instance configuration on the platform.
remote-vtep-ip
Create a remote VTEP and associate it to specified VNIDs.
Syntax remote—vtep—ip IP Address vni-profile profile name
To delete the remote VTEP, use the
no remote—vtep—ip
command.
Parameters
IP Address Enter the IP Address of the remote VTEP.
vni-profile Enter the keyword
vni-profile
followed by the profile name to which the remote
VTEP has to be associated.
Defaults None.
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide .
Version Description
9.11(0.0) Introduced on the S4048–ON, S4048T-ON, S6000–ON, S6010–ON, S6100–ON, and
Z9100–ON.
Usage Information Use this command to associate a specific VNID to a remote VTEP. Provide a valid profile name while associating to
the remote VTEP.
NOTE: The remote VTEP IP Address cannot be any of the local IP Addresses configured in the
switch.
vnid
Associate a range of VNID numbers to a specific VNI profile.
Syntax vnid VNID-Range
Virtual Extensible LAN (VXLAN) 1695