Version
Description
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre-6.1.1.0
Introduced on the E-Series.
Usage Information
Enabling RSA authentication allows the user to log in without being prompted for a password. In addition, the
OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (
ip ssh rsa-
authentication my-authorized-keys device://filename
command).
ip ssh server
Configure an SSH server. SSH server is enabled by default.
Syntax
NOTE:
Some of the parameters in this command require licensing to access. For more information,
contact your Dell Networking representative.
ip ssh server {ciphers
cipher-list
} {enable | port
port-number
} [kex
key-
exchange-algorithm
] [mac
hmac-algorithm
] [version {1 | 2}]
To disable SSH server functions, use the
no ip ssh server {ciphers
cipher-list
} {enable |
port
port-number
} [kex
key-exchange-algorithm
] [mac
hmac-algorithm
] [version {1
| 2}]
command.
Parameters
enable
Enter the key word
enable
to start the SSH server.
ciphers
cipher-list
Enter the keyword
ciphers
and then a space-delimited list of ciphers that the SSH
server supports. The following ciphers are available.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
The default cipher list is used.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
•
aes256-cbc
•
aes128-ctr
•
aes192-ctr
•
aes256-ctr
1448
Security