Dell S6100, Configuration Manual

Page: 1297 / 1743

9 UCAST 1132 1 143063 217 0 0 0 0
10 MCAST 0 0 0 0 0 0 0 0
11 MCAST 0 0 0 0 0 0 0 0
12 MCAST 0 0 0 0 0 0 0 0
13 MCAST 0 0 0 0 0 0 0 0
14 MCAST 0 0 0 0 0 0 0 0
15 MCAST 0 0 0 0 0 0 0 0
16 MCAST 0 0 0 0 0 0 0 0
17 MCAST 0 0 0 0 0 0 0 0
18 MCAST 0 0 0 0 0 0 0 0
19 MCAST 0 0 0 0 0 0 0 0
Dell#
Usage Information
In a dual homing setup, you can use this command only from the primary VLT peer.
The following list describes output of the
show qos statistics
command in the example:
• Queue # — Queue Number.
• Queued Bytes — Snapshot of the byte count in that queue.
• Queued Pkts — Cumulative packet count in that queue.
• Matched Pkts — The number of packets that matched the class-map criteria.
NOTE: When you configure
trust
, matched packet counters are not incremented in this
field.
• Matched Bytes — The number of bytes that matched the class-map criteria.
NOTE: When you configure
trust
, matched byte counters are not incremented in this
field.
• Dropped Pkts — The total of the number of packets dropped for green, yellow and out-of-profile.
show qos statistics wred-ecn
Display the statistics of ECN marked packets.
Syntax show qos statistics wred-ecn [ interface Slot/Port[/Subport] ]
Parameters
wred-ecn Enter the keyword
wred-ecn
to display the details of ECN marked packets.
interface Slot/
Port[/Subport] Enter an interface to display the details of ECN marked packets specific to the interface.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.11.0.0 Introduced on the S6100 and Z9100.
Usage Information This command displays the details of total number of packets marked with ECN and the total number of packets
that got dropped. The total number of packets includes both the packets marked with ECN and packets not
marked with ECN. Use the
clear hardware stack-unit stack-unit-ID unit unit-number
counters
command to clear the ECN packet counters.
Quality of Service (QoS) 1297