1 2 up AC up 12112
-- Unit Environment Status --
Unit Status Temp Voltage
------------------------------------
* 1 online 32C ok
* Management Unit
-- Optional Modules Environment Status (deg C) --
Unit Module Temperature
----------------------------------------------------
1 1 36
1 2 38
1 3 36
1 4 37
-- Thermal Sensor Readings (deg C) --
Unit CpuOnBoard Bcm56960_F SysInt Bcm56960_R SwitchOn FP-GE FP-SFP+ Bcm_Int Cpu_Int
---------------------------------------------------------------------------------------
1 32 36 32 38 34 34 31 53 30
Dell#
Dell#show environment fan
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed
------------------------------------------
1 1 up up 7680
1 2 up up 7710
1 3 up up 7605
1 4 up up 7635
Speed in RPM
Dell#
Dell#show environment thermal-sensor
-- Thermal Sensor Readings (deg C) --
Unit CpuOnBoard Bcm56960_F SysInt Bcm56960_R SwitchOn FP-GE FP-SFP+ Bcm_Int Cpu_Int
---------------------------------------------------------------------------------------
1 32 36 32 38 34 34 31 52 29
Dell#
show inventory
Display the switch type, components (including media), and Dell Networking Operating System (OS), including hardware identification
numbers and configured protocols.
Syntax
show inventory [media
slot
]
Parameters
media
slot
(OPTIONAL) Enter the keyword
media
then the stack ID of the stack member for which
you want to display pluggable media inventory.
NOTE:
This parameter is available but not supported in Dell Networking
Operating System version 8.3.11.4. Because stacking is not supported, if you
use this parameter, the output displays “Media not present or accessible”
(refer to the
Usage Information
section).
Defaults
none
Command Modes
CONFIGURATION
Control and Monitoring
127
