Version
Description
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
9.8(0.0P2)
Introduced on the S3048-ON.
9.7(0.0)
Introduced on the S6000-ON.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Added support for the Multi-Process OSPF.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre- 6.1.1.1
Introduced on the E-Series.
Usage Information
The
distribute-list out
command applies to routes autonomous system boundary routers (ASBRs)
redistributes into OSPF. It can be applied to external type 2 and external type 1 routes, but not to intra-area and
inter-area routes.
fast-convergence
This command sets the minimum LSA origination and arrival times to zero (0), allowing more rapid route computation so that convergence
takes less time.
Syntax
fast-convergence {
number
}
To cancel fast-convergence, use the
no fast convergence
command.
Parameters
number
Enter the convergence level desired. The higher this parameter is set, the faster OSPF
converge takes place. The range is from 1 to 4.
Defaults
None.
Command Modes
ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking
OS Command Line Reference Guide
.
Version
Description
9.10(0.0)
Introduced on the S6100-ON.
9.8(1.0)
Introduced on the Z9100-ON.
9.8(0.0P5)
Introduced on the S4048-ON.
Open Shortest Path First (OSPFv2 and OSPFv3)
1083