Dell S6100 Configuration Manual Download Page 1069

Page: 1069 / 1743

not-advertise

(OPTIONAL) Enter the keywords

not-advertise

to set the status to DoNotAdvertise

(that is, the Type 3 summary-LSA is suppressed and the component networks remain
hidden from other areas.)

Defaults

Not configured.

Command Modes

ROUTER OSPF

Command History

This guide is platform-specific. For command information about other platforms, see the relevant

Dell Networking

OS Command Line Reference Guide

Version

Description

9.10(0.0)

Introduced on the S6100-ON.

9.8(1.0)

Introduced on the Z9100-ON.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.7(0.0)

Introduced on the S6000-ON.

9.2(1.0)

Introduced on the Z9500.

9.0.2.0

Introduced on the S6000.

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Added support for the Multi-Process OSPF.

7.6.1.0

Introduced on the S-Series.

7.5.1.0

Introduced on the C-Series.

pre- 6.1.1.1

Introduced on the E-Series.

Usage Information

Only the routes within an area are summarized, and that summary is advertised to other areas by the ABR. External
routes are not summarized.

Related Commands

•

area stub

— create a stub area.

•

router ospf

— enter ROUTER OSPF mode to configure an OSPF instance.

area stub

Configure a stub area, which is an area not connected to other areas.

Syntax

area

area-id

stub [no-summary]

To delete a stub area, use the

no area area-id stub

command.

Open Shortest Path First (OSPFv2 and OSPFv3)

1069

«
...
1067
1068
1069
1070
1071
...
»

Summary of Contents for S6100
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S6100

Reviews:

Related manuals for S6100

Brands by name

Popular brands

Dell S6100, Configuration Manual

Search results

Summary of Contents for S6100

Reviews:

Related manuals for S6100

Brands by name

Popular brands