Dell S4048T-ON, Configuration Manual

Page: 590 / 1146

interface vlan 200
tagged 1/0/31
tagged 1/0/32
exit
interface vlan 300
tagged 1/0/31
tagged 1/0/32
exit
Debugging and Verifying MSTP Configurations
To debut and verify MSTP configuration, use the following commands.
• Display BPDUs.
EXEC Privilege mode
debug spanning-tree mstp bpdu
• Display MSTP-triggered topology change messages.
debug spanning-tree mstp events
Examples of Viewing MSTP Configurations
To ensure all the necessary parameters match (region name, region version, and VLAN to instance mapping), examine your individual
routers.
To show various portions of the MSTP configuration, use the
show spanning-tree mst
commands.
To view the overall MSTP configuration on the router, use the show running-configuration spanning-tree mstp in EXEC
Privilege mode.
To monitor and verify that the MSTP configuration is connected and communicating as desired, use the
debug spanning-tree mstp
bpdu
command.
Key items to look for in the debug report include:
• MSTP flags indicate communication received from the same region.
•
As shown in the following, the MSTP routers are located in the same region.
• Does the debug log indicate that packets are coming from a “Different Region”? If so, one of the key parameters is not matching.
• MSTP Region Name and Revision.
•
The configured name and revisions must be identical among all the routers.
• Is the Region name blank? That may mean that a name was configured on one router and but was not configured or was
configured differently on another router (spelling and capitalization counts).
• MSTP Instances.
•
To verify the VLAN to MSTP instance mapping, use the
show
commands.
• Are there “extra” MSTP instances in the Sending or Received logs? This may mean that an additional MSTP instance was
configured on one router but not the others.
The following example shows the
show run spanning-tree mstp
command.
Dell#show run spanning-tree mstp
!
protocol spanning-tree mstp
name Tahiti
revision 123
MSTI 1 VLAN 100
MSTI 2 VLAN 200,300
The following example shows viewing the debug log of a successful MSTP configuration.
Dell#debug spanning-tree mstp bpdu
MSTP debug bpdu is ON
590 Multiple Spanning Tree Protocol (MSTP)