Setting Up the Monitor
|
21
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions
.
To connect your monitor to the computer:
1
Turn off your computer.
2
Connect the HDMI/DP-mDP/USB cable from your monitor to
the computer.
3
Switch on your monitor.
4
Select the correct input source at Monitor OSD Menu and turn on your
computer.
NOTE:
S2817Q
default setting is DP 1.2. DP 1.1 Graphic card may not display
normally. Please refer to “
product specific problems – No image when using DP
connection to the PC
” to change default setting.
Connecting the HDMI cable
Connecting the mDP (or DP) cable
NOTE:
Default is DP port. Select input source on monitor to switch to mDP.
