4. Disassembly and Assembly Procedures
Take away the middle bezel, and put it on a fixture.
U
tear off the tapes for
releasing the key cables.
se a Philips-head screwdriver to remove 3pcs
screws for unlocking the function key board with the
middle bezel, and then
(No.1~3 screw size=M2x2.4, Torque=0.8
±
0.2kgfxcm
Tear off the tape, then lift up the panel module with
the bracket chassis for releasing the front bezel
away from the panel module.
S9
3
1
2
Unplug the LVDS cable from the connector of the
panel module by pushing the earing-locks.
S8
S10
Take away the bracket chassis module and then put
the bracket chassis module on a protective cushion.
Remove the Mylar from the hooks of the bracket
chassis module
.
S12
S11
Use a Philips-head screwdriver to remove 5pcs
screws for unlocking the circuit board, release all the
cables from the hooks.
(No.1 screw size=M4x8, Torque=6
±
0.5kgfxcm;
No. 2~5 screw size=M3x7.5, Torque=6
±
0.5kgfxcm)
S13
3
2
2
5
1
