Dell S2721D User Manual Download Page 71

Page: 71 / 77

Troubleshooting

│

Missing Pixels

LCD screen has
spots

• Cycle power On-Off.

• Pixel that is permanently Off is a

natural defect that can occur in LCD
technology.

• For more information on Dell Monitor

Quality and Pixel Policy, see Dell
support site at:

www .dell.com/

pixelguidelines

Stuck-on Pixels

LCD screen has
bright spots

• Cycle power On-Off.

• Pixel that is permanently off is a

natural defect that can occur in LCD
technology.

• For more information on Dell Monitor

Quality and Pixel Policy, see Dell
support site at:

www .dell.com/

pixelguideline s

Brightness
Problems

Picture too dim or
too bright

• Reset the monitor to factory settings.

• Adjust brightness & contrast controls

via OSD.

Geometric
Distortion

Screen not
centered correctly

• Reset the monitor to factory settings.

• Adjust horizontal & vertical controls

via OSD.

• When using HDMI/DisplayPort input,

the positioning adjustments are not
available.

Horizontal/
Vertical Lines

Screen has one or
more lines

• Reset the monitor to factory settings.

• Perform monitor self-test feature

check and determine if these lines are
also in self-test mode.

• Check for bent or broken pins in the

video cable connector.

• Run the built-in diagnostics.

Summary of Contents for S2721D














































































Search results

Summary of Contents for S2721D

Reviews:

Related manuals for S2721D

Brands by name

Popular brands

Dell S2721D, User Manual

Search results

Summary of Contents for S2721D

Reviews:

Related manuals for S2721D

Brands by name

Popular brands