46
| Operating
your
monitor
OSD warning messages
When the
Dynamic Contrast
feature is enabled (in these preset modes:
Game
or
Movie
), the manual brightness adjustment is disabled.
Dell S2718H/HX
To allow manual adjustment of brightness, the Dynamic Contrast
No
Yes
will be
switched off.
Do you want to continue?
When the monitor does not support a particular resolution mode, the following
message is displayed:
Dell S2718H/HX
The current input timing is not supported by the monitor display.
Please change your input timing to
1920x1080, 60Hz
or any
other monitor listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
Before the
DDC/CI
function is disabled, the following message is displayed:
Dell S2718H/HX
The function of adjusting display setting using PC application will be
No
Yes
disabled.
Do you wish to disable DDC/CI function?
When the monitor enters the
Power Save
Mode
, the following message appears:
Dell S2718H/HX
Entering Power Save Mode.
If you press any button other than the power button, the following messages will
appear depending on the selected input:
