18
| Setting up the monitor
Setting up the monitor
Attaching the stand
NOTE:
The stand riser and stand base are not attached when the monitor is shipped
from the factory.
NOTE:
The following procedure is applicable for the stand that is shipped with your
monitor. If you are connecting a third-party stand, see the documentation that shipped
with the stand.
To attach the monitor stand:
1
Using the instructions printed on the packaging box, remove the stand from the
cushion that secures it.
2
Align the tabs on the stand base with the slots on the stand riser and slide the
stand riser into the stand base.
3
Open the latch at the bottom of the stand base, tighten the screw by turning it
clockwise and then close the latch.
1
2
3
4
Lift the cover to access the VESA mount area at the back of the monitor.
