Releasing the Array Inner Drawer Safety Latch
It may be necessary to open the PS-M4110 array's inner drawer (containing the drives and control modules)
when it is removed from the M1000e enclosure.
When the PS-M4110 is out of the M1000 enclosure, the array's drawer cannot be opened unless its safety locking
mechanism is released.
There is a release button located on the side of the PS-M4110 array that releases the latch that secures the
array's drawer to its outer housing. This prevents the array's drawer from opening accidentally during handling
when outside of the M1000e enclosure.
To open the array drawer, press and hold the release button to manually unlock the safety latch.
The location of the release button is shown in
.
Caution:
The release button should only be used when the PS-M4110 array is on a level surface that is large
enough to support the array drawer when it is fully extended from the array.
Figure 17: Array Inner Drawer Release Button
25
Dell EqualLogic PS-M4110 Hardware Owner's Manual
Releasing the Array Inner Drawer Safety Latch
