manualshive.com logo in svg

Dell Precision T1700, Owner'S Manual

Share
Download
Dell Precision T1700 Owner'S Manual Download Page 33

Table 3. System Configuration

Option

Description

Integrated NIC

Allows you to enable or disable the integrated network card. You can set the 

integrated NIC to:

•

Disabled

•

Enabled

•

Enabled w/PXE (this option is enabled by default)

•

Enabled w/Cloud Desktop

•

Enable UEFI Network Stack

NOTE: Depending on the computer and the devices installed, the items listed in 

this section may or may not appear.

Serial Port

Allows you to define the serial port settings. You can set the serial port to:

•

Disabled

•

COM1

•

COM2

•

COM3

•

COM4

NOTE: The operating system may allocate resources even though the setting is 

disabled.

SATA Operation

Allows you to configure the operating mode of the integrated hard drive controller.

•

Disabled - The SATA controllers are hidden.

•

ATA - SATA is configured for ATA mode.

•

AHCI - SATA is configured for AHCI mode.

•

RAID ON - SATA is configured to support RAID mode.

Drives

Allows you to enable or disable the various on-board drives:
For Mini Tower

•

SATA-0

•

SATA-1

•

SATA-2

•

SATA-3

For Small Form Factor

•

SATA-0

•

SATA-1

•

SATA-2

SMART Reporting

This field controls if the hard drive errors for the integrated drives are reported during 

system startup. This technology is part of the SMART (Self Monitoring Analysis and 

Reporting Technology) specification.

•

Enable SMART Reporting - This option is disabled by default.

33

Summary of Contents for Precision T1700




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands