Dell Precision R5400 Workstation/FX100 Technical Guide
D E L L
P R E C I S IO N
W O R K S T A T I O N S
–
D O N ’ T
S E T T L E
F O R
A N Y T H I N G
L E S S
A D #
8 1 0 0 0 2 0 0 8
P
A G E
3 2
O F
3 6
Off
– Prefetch is disabled
On
– Prefetch is enabled
Default setting:
Off
HW Prefetch
This field allows users to turn on/off Hardware Prefetch.
Off
– Prefetch is disabled
On
– Prefetch is enabled
Default setting:
On
Security
Admin
Password
This option provides restricted access to the computer's System Setup program in the same way that access
to the system can be restricted with the System Password option. The settings are
Set
and
Not Set
.
If the option is
Not Set
, type a password and confirm it to enable this option.
If the option is
Set
, there will be a "lock icon" at the top right corner of every screen in setup.
To disable the password, type the old password and then press <Enter> twice to leave the new and confirm
password fields blank.
Default setting:
Not Set
System
Password
Displays the current status of the system's password security feature and allows a new system password to
be assigned and verified. The settings are
Set
and
Not Set
.
If the option is
Not Set
, type a password and confirm it to enable this option.
If the option is
Set
, the computer will not boot until the correct password is entered.
To disable the password, type the old password and then press <Enter> twice to leave the new and confirm
field blank.
Default setting:
Not Set
SATA-0
Password
SATA-1
Password
If supported by the hard drive, this field allows the user to set a password for the hard drive.
The drive password is used to prohibit an unauthorized user from using the drive. The settings are
Not Set
and
Set
.
SATA-2
Password
This drive is a CD or DVD drive. Drive security is not available.
Password
Changes
This option locks the system password field with the admin password. When the field is locked, a valid admin
password is required to modify or delete the system password.
Default setting:
Unlocked
Chassis
Intrusion
When enabled, this option alerts the user, during the next computer startup, that the computer cover has
been opened. The settings are
On
,
On-Silent
, and
Off
.
Default setting:
On-Silent
Intrusion Alert
This option displays in system setup only if a chassis intrusion event occurred. If an intrusion has been
detected, the following message is displayed.
A chassis intrusion has been detected. Press <Enter> to acknowledge and clear this event. The system will
be armed to look for future security breaches. Press <Esc> otherwise.
TPM Security
This field controls the TPM security device. The settings are:
