Dell Precision 7F867, Setup And Quick Reference Manual

Page: 49 / 200

S e t u p a n d Q u i c k Re f e r e n c e G u i d e
49
System Messages
If an error occurs during start-up, a message may be reported on the
monitor identifying the problem. If a system message is displayed, look it up
under "System Messages" in the
User’s Guide for suggestions on resolving
any problems. The system messages are listed alphabetically.
NOTE: If the system
message you received is
not listed in the
User’s
Guide , check the
documentation for the
application program that
you were running at the
time the message
appeared and/or the
operating system
documentation for an
explanation of the
message and a
recommended action.
Beep Codes
If an error occurs during start-up that cannot be reported on the monitor,
your computer may emit a beep code that identifies the problem. The beep
code is a pattern of sounds: for example, one beep, followed by a second
beep, and then a burst of three beeps (code 1-1-3) means that the computer
was unable to read the data in nonvolatile random-access memory
(NVRAM).
If a beep code is emitted, write it down and look it up under "System Beep
Codes" in the
User’s Guide .