manualshive.com logo in svg

Dell Precision 7920, Owner'S Manual, Page: 112 / 133

Share
Download
Dell Precision 7920 Owner'S Manual Download Page 112

System Setup Main Menu

Option

Description

System BIOS

Enables you to configure BIOS settings.

iDRAC Settings

Enables you to configure iDRAC settings.

The iDRAC Settings utility is an interface to set up and configure the iDRAC parameters using UEFI.
You can enable or disable various iDRAC parameters by using the iDRAC Settings utility. For more
information about this utility, see the Integrated Dell Remote Access Controller User’s Guide at 

dell.com/

esmmanuals

.

Device Settings

Enables you to configure device settings.

Service Tag
Settings

Enables service tag of the system

System BIOS screen

You can use the 

System BIOS

 screen to view BIOS settings as well as edit specific functions such as boot order, system

password, setup password, setting RAID mode, and enabling or disabling USB ports.

About this task

In the 

System Setup Main Menu

, click 

System BIOS

.

The 

System BIOS

 screen details are explained below.

Menu Item

Description

System
Information

Displays information about the system such as the system model name, BIOS version, Service Tag, and so
on.

Memory Settings

Displays information and options related to installed memory.

Processor
Settings

Displays information and options related to the processor such as speed, cache size, and so on.

SATA Settings

Displays options to enable or disable the integrated SATA controller and ports.

NVMe Settings

Displays options to enable or disable the NVMe Settings.

Boot Settings

Displays options to specify the boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot
settings.

Network Settings

Displays options to enable or disable the Network Settings

Integrated
Devices

Displays options to enable or disable integrated device controllers and ports, and to specify related
features and options.

Serial
Communication

Displays options to enable or disable the serial ports and specify related features and options.

System Profile
Settings

Displays options to change the processor power management settings, memory frequency, and so on.

System Security

Displays options to configure the system security settings like, system password, setup password, TPM
security, and so on. It also enables or disables support for the power and NMI buttons on the system.

Redundant OS
Control

Displays options to change the Redundant OS Control

Miscellaneous
Settings

Displays options to change the system date, time, and so on.

Debug Menu
Settings

This field controls serial debug output level for certain drivers.

112

BIOS and UEFI

Summary of Contents for Precision 7920






































































































































Reviews:

No comments