Installing the HDD
1. Insert the HDD to its slot in the HDD bracket with the connector end of the hard drive towards the back of the HDD carrier.
2. Slide the HDD carrier back into the hard drive bay.
3. Install the following:
a.
b.
c.
After working inside your computer
NVMe Flexbay
Removing the NVMe Flexbay
Before working inside your computer
.
2. Remove the:
a.
NOTE:
Do not remove the side cover, if the front I/O bezel is unlocked.
b.
3. To remove the NVMe flexbay:
a. Press the release button [1] to unlock the latch [2].
28
Removing and installing components
Summary of Contents for Precision 5820 Tower
