Dell PowerVault TL1000, User Manual, Page: 53 / 192

Physical library settings
To configure the library cartridge assignment settings, complete the following procedure:
1. Expand Configure Library, if necessary, and click Physical in the left navigation pane of the Web
User Interface.
2. Select the Library settings.
v Library name - Enter a name for your library.
v Auto Cleaning
- Automatically cleans the drive when the drive requests that cleaning and a
cleaning cartridge is present in the library. Auto cleaning can be enabled only when there is at least
one inactive position in the magazine in the library.
Note: It is recommended that the Auto Clean function is enabled on the library. With the Auto
Clean function enabled, drive cleaning occurs automatically. The only time Auto Cleaning must be
disabled is when your Backup Application requires that it has control.
v Bar code label length - Use to choose the number of characters in the cartridge bar code that is
reported to the host computer.
3. Click Submit to enable the settings.
Configuring network settings
Once the network settings are entered on the Operator Panel, the current network configuration of the
library can be modified with the Web User Interface. The changes that are made to the network settings
do not take effect until after the library is rebooted.
a29z0123
Figure 32. Cartridge assignment settings
a29z0125
Figure 33. Network settings
Installation and configuration
35