background image

Other Information You May Need

WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be 
included within this document or as a separate document.

The 

Getting Started Guide

 provides an overview of setting up your system and technical specifications.

The 

Owner's Manual

 provides information about solution features and describes how to troubleshoot the 

system and install or replace system components.

The rack documentation included with your rack solution describes how to install your system into a rack, if 

required.

The 

Deployment Guide

 provides information on hardware deployment and the initial deployment of the NAS 

appliance.

The 

System Placemat

 provides information on how to set up the hardware and install the software on your NAS 

solution.

The 

Online Help

 provides information about configuring and managing the software. The online help is 

integrated with the system and can be accessed from the NAS Manager web interface.

Any media that ships with your system that provides documentation and tools for configuring and managing your 

system, including those pertaining to the operating system, system management software, system updates, and 

system components that you purchased with your system.

For the full name of an abbreviation or acronym used in this document, see the Glossary at support.dell.com/

manuals.

NOTE: Always check for updates on support.dell.com/manuals and read the updates first because they often 
supersede information in other documents.

16

Summary of Contents for PowerVault NX3600






















































































































Reviews: