Dell PowerVault NX300, Hardware Owner'S Manual

Page: 151 / 192

Troubleshooting Your System
151
• Expansion cards
• Integrated storage card
• iDRAC6 Express card
• iDRAC6 Enterprise card
• Power supplies
• Fans
• Processors and heat sinks
• Memory modules
4
Let the system dry thoroughly for at least 24 hours.
5
Reinstall the components you removed in step 3.
6
Close the system. See "Closing the System" on page 83.
7
Reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
If the system does not start properly, see "Getting Help" on page 177.
8
If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 93.
9
Run the appropriate online diagnostic test. See "Using Online Diagnostics"
on page 167.
If the tests fail, see "Getting Help" on page 177.
Troubleshooting a Damaged System
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1
Open the system. See "Opening the System" on page 82.
2
Ensure that the following components are properly installed:
•
Expansion cards
book.book Page 151 Thursday, August 13, 2009 7:27 AM