manualshive.com logo in svg

Dell PowerVault MD3660i Series Storage Array, Deployment Manual, Page: 4 / 56

Share
Download
Dell PowerVault MD3660i Series Storage Array Deployment Manual Download Page 4

Using A DHCP server

........................................................................................................................................27

Using A Static IP Address

................................................................................................................................27

Using A DNS Server

.........................................................................................................................................28

Using A WINS Server

.......................................................................................................................................28

Linux Host Setup

.....................................................................................................................................................28

Using DHCP

......................................................................................................................................................28

Using A Static IP Address

................................................................................................................................29

6 Uninstalling MD Storage Manager........................................................................................31

Uninstalling MD Storage Manager From Windows

................................................................................................31

Uninstall MD Storage Manager From Microsoft Windows Operating Systems Other Than Microsoft 
Windows Server 2008

.......................................................................................................................................31

Uninstall MD Storage Manager From Windows Server 2008 GUI Versions

....................................................31

Uninstall MD Storage Manager From Windows Server 2008 Core Versions

...................................................31

Uninstalling MD Storage Manager From Linux

......................................................................................................32

7 Appendix — Manual Configuration Of iSCSI........................................................................33

Step 1: Discover The Storage Array (Out-of-band Management Only)

..................................................................33

Default Management Port Settings

..................................................................................................................33

Automatic Storage Array Discovery

................................................................................................................34

Manual Storage Array Discovery

.....................................................................................................................34

Setting Up The Array

........................................................................................................................................34

Step 2: Configure The iSCSI Ports On The Storage Array

......................................................................................35

Step 3: Perform Target Discovery From The iSCSI Initiator

...................................................................................35

For Windows Server 2003 Or Windows Server 2008 GUI Version

....................................................................35

For Windows Server 2008 Core Version

...........................................................................................................36

For Red Hat Enterprise Linux 5 Or 6, SUSE Linux Enterprise Server 10 Or 11

..................................................36

Step 4: Configure Host Access

...............................................................................................................................37

Understanding CHAP Authentication

.....................................................................................................................37

What Is CHAP

...................................................................................................................................................37

Target CHAP

.....................................................................................................................................................37

Mutual CHAP

....................................................................................................................................................38

CHAP Definitions

..............................................................................................................................................38

Step 5: Configure CHAP Authentication On The Storage Array (Optional)

.............................................................38

Configuring Target CHAP Authentication On The Storage Array

....................................................................38

Configuring Mutual CHAP Authentication On The Storage Array

....................................................................39

Step 6: Configure CHAP Authentication On The Host Server (Optional)

................................................................39

For Windows Server 2008 GUI Version

............................................................................................................39

For Windows Server 2008 Core Version

...........................................................................................................40

For Red Hat Enterprise Linux 5 Or 6, SUSE Linux Enterprise Server 10 Or 11

..................................................40

For SUSE Linux Enterprise Server SP3 Using The GUI

.....................................................................................41

Step 7: Connect To The Target Storage Array From The Host Server

....................................................................42

Summary of Contents for PowerVault MD3660i Series Storage Array

























































Reviews:

No comments