manualshive.com logo in svg

Dell PowerVault MD3400, Owner'S Manual, Page: 3 / 47

Share
Download
Dell PowerVault MD3400 Owner'S Manual Download Page 3

Contents

1 

About Your System

....................................................................................................7

Introduction

........................................................................................................................................... 7

Front-Panel Features and Indicators

.................................................................................................... 7

Back-Panel Features and Indicators

...................................................................................................10

Physical-Drive Indicator Patterns

....................................................................................................... 10

Power Supply and Cooling Fan Features

............................................................................................ 11

Power Indicator Codes and Features

..................................................................................................11

Related Documentation

...................................................................................................................... 12

2 

Controller Modules

................................................................................................ 13

RAID Controller Modules

.................................................................................................................... 13

RAID Controller Module Connectors and Features

........................................................................... 13

RAID Controller Module—Additional Features

...................................................................................14

Battery Backup Unit

.......................................................................................................................14

Storage Array Thermal Shutdown

................................................................................................. 15

System Password Reset

.................................................................................................................15

Cache Functions and Features

............................................................................................................15

Cache Mirroring

............................................................................................................................. 15

Write-Back Cache

..........................................................................................................................15

Write-Through Cache

................................................................................................................... 15

3 

Installing Array Components

............................................................................... 17

Recommended Tools

.......................................................................................................................... 17

Front Bezel (Optional)

..........................................................................................................................17

Removing the Front Bezel

............................................................................................................. 17

Installing the Front Bezel

............................................................................................................... 17

Physical Drives

..................................................................................................................................... 18

SAFETY Models AMT E03J and E04J

............................................................................................ 18

Removing a 2.5 Inch Physical-Drive Blank

................................................................................... 18

Installing a 2.5 Inch Physical-Drive Blank

..................................................................................... 18

Removing a 3.5 Inch Physical-Drive Blank

................................................................................... 18

Installing a 3.5 Inch Physical-Drive Blank

..................................................................................... 19

Removing a Hot-Swap Physical Drive

.......................................................................................... 19

Installing a Hot-Swap Physical Drive

............................................................................................20

Removing a Physical Drive From a Physical-Drive Carrier

...........................................................21

Installing a Physical Drive Into a Physical-Drive Carrier

.............................................................. 22

RAID Controller Module 

.....................................................................................................................22

Removing a RAID Controller Module Blank

................................................................................. 23

Summary of Contents for PowerVault MD3400
















































Reviews:

No comments