Dell PowerVault LTO5-140 User Manual Download Page 51

Page: 51 / 93

Using a web browser, connect to

http://169.254.0.3/service.html

. The drive

maintenance page will be displayed.

Check the appropriate radio button, then press

Run

to run that maintenance

function. If the drive is in a library, many of the maintenance functions are
disabled. To cancel the maintenance function press

Cancel

. These are the same

maintenance functions that are executed via the unload button on the drive's
front panel.

Note:

For more information on Maintenance Function details, see “Selecting a
Diagnostic or Maintenance Function” on page 5-1.

Fixing SAS Connectivity Problems

If there appears to be a problem connecting or communicating with the drive,
follow this procedure.

Ensure that the power is on to the tape drive.

Replace the SAS cable and interposers, if any, and retry the failing operation.

7ru052

Figure 5-3. Drive Maintenance page

Chapter 5. Troubleshooting

5-15

Summary of Contents for PowerVault LTO5-140






























































































Search results

Summary of Contents for PowerVault LTO5-140

Reviews:

Related manuals for PowerVault LTO5-140

Brands by name

Popular brands

Dell PowerVault LTO5-140, User Manual

Search results

Summary of Contents for PowerVault LTO5-140

Reviews:

Related manuals for PowerVault LTO5-140

Brands by name

Popular brands