Table 11. Descriptions and corrective actions (continued)
Mid-Tape Recovery. The SCD flashes one segment at a time to complete one figure-eight
motion, then flashes the number
9
, then flashes one segment at a time to complete one
figure-eight motion, then flashes the number
8
. This action continues until the number
1
flashes and the drive completes. You can eject the cartridge once the count down ends
by pressing Eject.
Drive Status
1. Connect an Ethernet cable to the drive or bridge box.
Important: The Ethernet port is for Service only. Do not connect the customer network to Service
ports.
2. Using a web browser, connect to http://169.254.0.3. The drive status page is displayed.
a67ru053
Figure 21. Drive Status page
3. Check the appropriate boxes to get information on that topic.
Chapter 4. Troubleshooting 43
