Dell PowerVault 114T 2U Installation And Instructions Manual Download Page 1

Page: 1 / 6

www

.de
ll

.co
m

sup

por

t.d
e

Installation and Removal Instructions for Dell PowerVault

114T

If ferrites are present, there is no need to replace or install new ones. When replacing SCSI cables or power

supplies with ferrites attached, refer to

Adding Ferrites to New SCSI Cables or Power Supply

to open ferrites.

Power Cables – Ferrite Installation

Place one ferrite on each of the power cables that connect to the tape drive (see Figure 1-2).

Figure 1-1. Open Ferrite for Power Cable

Figure 1-2. Ferrites Installed on Power Cables

October 2007

FX973 Ferrite Core Kit

Summary of Contents for PowerVault 114T 2U

Page 2: ...m SCSI Cables Ferrite Installation Remove the backing from the adhesive tape and adhere the open ferrites to the back bays underneath the SCSI cables see Figure 1 4 Figure 1 3 Open Ferrite for SCSI Cable Figure 1 4 Ferrites Adhered to the Back Bays ...

Page 3: ...s to complete the installation on SCSI cables see Figure 1 5 Figure 1 5 Ferrites Installed on SCSI Cables Refer to Figure 1 6 for the completed installation of the ferrites on SCSI cables and power cables Figure 1 6 Ferrites Installed on SCSI Cables and Power Cables ...

Page 4: ...screwdriver to pry open the ferrites surrounding the power and SCSI cables See Figure 1 7 for opening ferrite on power cable and Figure 1 8 for opening ferrites on SCSI cable Please make sure the ferrites are placed on your new SCSI cable or power supply Figure 1 7 Opening Ferrite on Power Cable Figure 1 8 Opening Ferrites on SCSI Cable ...

Page 5: ...w w w d e l l c o m s u p p o r t d e l l c o m ...