manualshive.com logo in svg

Dell PowerVault 110T DLT VS80, Quick Start Manual, Page: 11 / 52

Share
Download
Dell PowerVault 110T DLT VS80 Quick Start Manual Download Page 11

Getting Started

11

DPM Prerequisites

Before you run Microsoft

®

 System Center Data Protection Manager (DPM) 

2007 for the first time, these prerequisites apply:

•

The system must be on a network and have a valid IP address.

•

The system must be a member of a domain.

•

The user must be logged on as a domain user, and that domain user must 
be a member of the local administrator group.

At initial login, the PowerVault Data Protection Solution Configuration 
Wizard starts up automatically. Exit the wizard to configure your system to 
meet the prerequisites above. The following sections in this document guide 
help you complete these tasks.

Figure 1-5.

PowerVault Data Protection Solution Configuration Wizard Welcome 

Screen

Rack Installation

For rack mountable systems, see the 

Rack Installation Instructions

 or 

Rack 

Installation Guide

 included with your rack solution for information on how to 

install your system into a rack.

Summary of Contents for PowerVault 110T DLT VS80





















































Reviews:

No comments