1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
If applicable, route the cables inside the system along the chassis wall and secure the cables by using the cable-securing
bracket.
Steps
1.
Align the guide slots on the cooling shroud with the slots on the chassis.
2.
Lower the cooling shroud into the chassis until it is firmly seated.
Figure 23. Installing the cooling shroud
1.
slot on the chassis (4)
2.
touch point (2)
3.
cooling shroud
4.
guide slot on the cooling shroud (4)
Next steps
1.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
After working inside your system
Cooling fans
Your system supports six hot-swappable cooling fans.
69
