manualshive.com logo in svg

Dell PowerEdge R720 t, Owner'S Manual, Page: 14 / 165

Share
Download
Dell PowerEdge R720 t Owner'S Manual Download Page 14

Option

Description

MAC

Displays the MAC addresses for iDRAC, iSCSI, or Network devices.

Name

Displays the name of the Host, Model, or User String for the system

Number

Displays the Asset tag or the Service tag for the system.

Power

Displays the power output of the system in BTU/hr or Watts. The display format can be 
configured in the Set home submenu of the Setup menu.

Temperature

Displays the temperature of the system in Celsius or Fahrenheit. The display format can be 
configured in the Set home submenu of the Setup menu.

Diagnostic Indicators

NOTE: The diagnostic indicators are present only on PowerEdge R720xd.

The diagnostic indicators on the system front panel display error status during system startup.

NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it into a working 
power source and press the power button.

The following section describes system conditions and possible corrective actions associated with these indicators:

Health indicator

Condition

Corrective Action

If the system is on, 
and in good health, 
the indicator lights 
solid blue.

None required.

The indicator blinks 
amber if the system 
is on or in standby, 
and any error exists 
(for example, a failed 
fan or hard drive)

See the System Event Log or system messages for the specific issue.

Invalid memory configurations can cause the system to halt at 
startup without any video output. See 

Getting Help

.

Hard-drive indicator

Condition

Corrective Action

The indicator blinks 
amber if a hard drive 
experiences an 
error.

See the System Event Log to determine the hard drive that has an 
error. Run the appropriate Online Diagnostics test. Restart system 
and run embedded diagnostics (ePSA). If the hard drives are 
configured in a RAID array, restart the system and enter the host 
adapter configuration utility program.

14

Summary of Contents for PowerEdge R720 t






































































































































































Reviews:

No comments