Dell PowerEdge R640XL, Configuration Manual, Page: 5 / 27

Gen14 Dell Hardware
5
Security Analytics
Configuration Guide
Prerequisites (Before Using This Configuration Guide)
Before attempting to configure a Security Analytics system with Gen14 Dell hardware, make sure to first complete the
following quick start guides for your server and storage array.
1. Complete the following steps to install the SA
- SRVG8-20 or SA - SRVG8-20 server, per the instructions in the
SA Gen14 Dell Server Quick Start Guide
, available at: techdocs.broadcom.com

Unpack the server.

Rackmount the server.

Install the Cable Management Arm (CMA).

Connect cables.

Perform the initial configuration.

License the server.
2. Complete the following steps to install the SA - STAG8-2U144 or SA - STAG8-5U840 storage array, per the instructions in
the
SA Gen14 Dell Storage Quick Start Guide
, available at: techdocs.broadcom.com

Unpack the storage array.modu

Rackmount the storage array.

Install drives in the SA - STAG8-5U840storage array.

Connect cables.

Power on the system.

Configure network settings for the storage array.
Where to Go for Help
Symantec Technical Support

For Symantec Technical Support, case management, licenses, and product downloads, go to:
support.broadcom.com/security
Security Analytics Help and Documentation

For Security Analytics help, in the web UI, select Settings > Help > [language].

For Security Analytics software documentation, go to techdocs.broadcom.com and type “Security” in the search field,
then click Security Analytics .
Appliance Documentation

For Symantec server and storage array documentation, go to techdocs.broadcom.com and type “Appliances” in the
search field, then click Hardware Appliances .

For Dell PowerEdge server documentation, go to dell.com/poweredgemanuals and navigate to your server model
( PowerEdge R640 ).

For Dell PowerVault storage documentation, go to dell.com/storagemanuals and navigate to your storage array model
( PowerVault ME4012 , ME4084 , or ME412 ).