Convention
Power indicator pattern
Condition
CAUTION:
If two PSU are used, they must be of the same type and have the
same maximum output power.
CAUTION:
Combining AC and DC PSU is not supported and triggers a
mismatch.
D
Not lit
Power is not connected.
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
NOTE:
The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.
Figure 9. iDRAC Direct LED indicator
1
iDRAC Direct status indicator
The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management port (USB
XML Import).
Table 9. iDRAC Direct LED indicators
Convention
iDRAC Direct LED
indicator pattern
Condition
A
Green
Turns green for a minimum of two seconds to indicate the start and end of a file transfer.
B
Flashing green
Indicates file transfer or any operation tasks.
C
Green and turns off
Indicates that the file transfer is complete.
D
Not lit
Indicates that the USB is ready to be removed or that a task is complete.
The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect):
Dell PowerEdge R530 system overview
21
