PowerConnect M8024 Release Notes
Page 4
CLI Reference Manual Updates
OSPF
Title
Description
maximum-paths <1-6>
The input range of command “maximum-paths <1-2>” changes to
“maximum-paths <1-6>”.
show running-config
Title
Description
show running-config interface
[ {ethernet
<unit>/<port-type><port> | loopback <loopbackId>
| port-channel <Port-Channel Number>| tunnel
<tunnelId> | vlan <VlanId>}]
This command has been enhanced so that it can be executed for a
specific interface, port-channel, or VLAN.
Commands Not Supported
Title
Description
The following commands are not supported in the
Dell PowerConnect M8024 Series switches:
o
The duplex command in port aggregator
configuration mode.
o
The negotiation command in port
aggregator configuration mode.
o
The speed command in port aggregator
configuration mode.
o
The copper port commands:
Test copper-port tdr < port
number>
Show
copper-ports
tdr
These commands appear in the
CLI Reference Manual
but should not
have been included.
