Dell PowerConnect J-8216, Hardware Manual

Page: 54 / 270

Table 19: Network Port LEDs on Line Cards in a J-EX8200 Switch—Link/Activity LED
State and Description Color LED
• On steadily—The port and the link are active, but there is no
link activity.
• Blinking—The port and the link are active, and there is link
activity.
• Off—The port is not active.
Green Link/Activity
The LEDs labeled Status in Figure 21 on page 37, Figure 22 on page 37, and Figure 23 on
page 37 indicate the status of one of the three port parameters. The port parameters are
administrative status, duplex mode, and speed.
Table 20 on page 38 describes the Status LED. From the Idle menu of the LCD, use the
Enter
button on the LCD panel to toggle between the ADM, DPX, and SPD indicators.
Table 20: Network Port LEDs on Line Cards in a J-EX8200 Switch—Status LED
State, Color, and Description LCD Indicator LED
Indicates the administrative status (enabled or disabled). The
status indicators are:
• Green—Administrative status enabled.
•
Unlit—Administrative status disabled.
LED: ADM Status
Indicates the duplex mode. The status indicators are:
• Green—Port is set to full-duplex mode.
•
Unlit—Port is not set to full-duplex mode.
LED: DPX
Indicates the speed. The speed indicators are different in the
line cards.
The speed indicators for 8-port SFP+ line cards are:
• Unlit—Less than 10 Gbps
• Green—10 Gbps
The speed indicators for 48-port SFP line cards are:
• Unlit—Less than 1 Gbps
• Green—1 Gbps
The speed indicators for 48-port RJ-45 line cards are:
• Unlit—10 Mbps
• Green—Blinking—100 Mbps
• Green—On steadily—1000 Mbps
LED: SPD
Related
Documentation
8-port SFP+ Line Card in a J-EX8200 Switch on page 32
•
•
48-port SFP Line Card in a J-EX8200 Switch on page 33
•
48-port RJ-45 Line Card in a J-EX8200 Switch on page 34
38
Dell PowerConnect J-Series J-EX8216 Ethernet Switch Hardware Guide