PowerConnect B-RX Series Getting Started Guide
21
53-1001682-03
FIGURE 11
Installing power supply in a PowerConnect B-RX Series
four-slot chassis
5. For the eight-slot and 16-slot chassis, follow these steps while referring to
Figure 12
or
Figure 13
on page 22
(depending on your chassis), then continue with
step 6
.
a. Slide the card along the card guide until fully inserted, then push the power supply front panel toward the
back of the chassis. This action causes the power supply connector to latch into the backplane connector.
b. Gently pull the handle on the power supply front panel upward and toward the top of the power supply front
panel. This action locks the power supply in place.
FIGURE 12
Installing power supply in a PowerConnect B-RX Series eight-slot chassis
1
Power supply
1
Power supply
1
1
