background image

2

Fan Assembly Replacement Procedure

53-1001790-01

Notes, Cautions, and Warnings

NOTE

A NOTE indicates important information that helps you make better use of your computer.

CAUTION
See the safety and regulatory information that shipped with your system.  For additional regulatory 
information, see the Regulatory Compliance Homepage on www.dell.com at the following location:   
www.dell.com/regulatory_compliance.

CAUTION
A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.

DANGER

A DANGER indicates a potential for property damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: 

Dell

, the 

DELL

 logo, 

Inspiron

Dell Precision

Dimension

OptiPlex

Latitude, PowerEdge, PowerVault, PowerApp, Dell 

OpenManage 

and the

 YOURS IS HERE

 

logo are trademarks of Dell Inc.; 

Intel

Pentium, 

and

 Celeron 

are registered trademarks of Intel Corporation 

in the U.S. and other countries; 

Microsoft

Windows

,

 Windows Server

,

 MS-DOS 

and

 Windows Vista 

are either trademarks or registered trademarks 

of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. 
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Regulatory Model Codes: Brocade DCX-4S, Brocade DCX

Summary of Contents for PowerConnect B-7500







Reviews: