Dell PowerConnect 2608, User Manual

Page: 12 / 38

12
Introduction
www
.del
l.
com |
su
ppo
rt.
d
e
ll.
co
m
Figure 1-6. Brackets for Wall Installation
3
Place the switch against the wall and mark the wall through the holes of the brackets.
4
Drill holes in the wall for the brackets and install the appropriate mounting hardware (not
supplied).
5
Place the against the wall so that the bracket holes align with the holes in the wall.
6
Insert and tighten the screws through each of the mounting brackets.
Technical Information
Table 1-2. Specifications
Network Protocol and Standards Compatibility
IEEE 802.3 CSMA/CD
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3z/ab 1000Base-T
IEEE 802.3x Flow Control
IEEE 802.3p Priority
Interface
RJ-45 connectors; one SFP connector available on 24-port switch
Power Supply
100–240 VAC/50 ­ 60 Hz universal input