manualshive.com logo in svg

Dell PERCS140, User Manual

Share
Download
Dell PERCS140 User Manual Download Page 10

•

PowerEdge M640p

•

PowerEdge FC640

Supported physical disks

The PERC S140 controller supports the following physical disk types:

•

SATA hard disk drive (HDD)

•

SATA solid state drive (SSD)

•

NVMe PCIe SSDs including NVMe PCIe SSD 2.5 - inch small form factor and NVMe PCIe SSD adapter.

NOTE: 

Only Dell - complaint NVMe PCIe SSDs are supported. For information on PowerEdge NVMe 2.5 - inch SFF and 

PowerEdge NVMe PCIe SSD adapter, see the Express Flash NVMe PCIe SSD user's guide at dell.com/manuals.

NOTE: 

Mixing drives of different speeds (7,200 rpm, 10,000 rpm, or 15,000 rpm) and bandwidth (3 Gbps or 6 Gbps) while 

maintaining the same drive type (SATA) and technology (HDD or SSD) is supported.

NOTE: 

Mixing NVMe PCIe SSDs and SATA drives is not supported in a single RAID virtual disk.

Management applications for the PERC S140

Management applications enable you to manage and configure the RAID subsystem, create and manage multiple disk groups, control and 
monitor multiple RAID systems, and provide online maintenance. Management applications for PERC S140 include:

•

BIOS Configuration Utility — This is also known as Ctrl+R, and is a storage management application that configures and maintains 

RAID disk groups and virtual disks. See 

BIOS Configuration Utility

.

•

Unified Extensible Firmware Interface (UEFI) RAID Configuration Utility. This storage management application is integrated into the 

System BIOS, accessible through the F2 key. See 

UEFI RAID configuration utility

. RAID configurations on NVMe PCIe SSDs are only 

supported through the UEFI RAID configuration utility.

NOTE: 

Ensure that the RAID mode is enabled for NVMe PCIe SSDs. See 

Setting the NVMe PCIe SSDs to RAID mode 

•

OpenManage Storage Management-This application enables you to perform controller and enclosure functions for all supported RAID 

controllers and enclosures from a single graphical or command-line interface without using controller BIOS utilities. For more 

information, see the 

OpenManage Storage Management User's Guide

 at 

dell.com/openmanagemanuals

.

•

Lifecycle Controller-This is a management application for PERC. For more information, see the Lifecycle Controller User’s Guide at 

dell.com/esmmanuals

.

•

iDRAC

10

Overview

Summary of Contents for PERCS140

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands