2. Connect the antenna cables to the connectors on the WWAN card.
3. Place the WWAN card bracket above the WWAN card to secure the antenna cables.
4. Tighten the (M2x3) screw to secure the WWAN card bracket to the system board.
Next steps
1. Install the
.
2. Install the
3. Follow the procedure in
after working inside your computer
.
Tastaturgitter
Removing the keyboard lattice
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
.
3. Remove the
About this task
The figure indicates the location of the keyboard lattice and provides a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, pry the top edge of the keyboard lattice starting from the recess points and working your way around the sides
and bottom edge.
2. Remove the keyboard lattice from the keyboard.
Adskillelse og samling
37
Summary of Contents for P93F
