Removing the palm-rest assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
.
Prerequisites
1. Remove the
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
7. Remove the
8. Remove the
power button with fingerprint reader
.
9. Remove the
.
Procedure
After performing all the pre-requisites, we are left with the palm-rest assembly.
31
Removing the palm-rest assembly
59
Summary of Contents for P82G
